Raymarine SmartPilots interface to hydraulic steering systems using a rugged hydraulic pump that is matched to the capacity of your vessel's hydraulic steering system. To match a Raymarine hydraulic pump to your vessel you need to learn the size (in cubic inches) of the actual hydraulic cylinder ram or rams that are mounted rudder on inboard engine boats or the ram mounted to the drive on outboard engine boats. Your steering system documentation will have this information.
Raymarine autopilot hydraulic pumps are available in several sizes to accommodate a broad range of steering cylinder capacities. The list below illustrates the capacity of each type of Raymarine hydraulic autopilot pump when used with the corresponding Raymarine autopilot.
Type 0.5 Pump 12V
Reversing hydraulic pump for use with steering systems equipped with 3.1-6.7 cubic inch (50cc -110cc) hydraulic steering rams.
Type 1 Pump 12V
Reversing hydraulic pump for use with steering systems equipped with 4.9-14 cubic inch (80cc - 230cc) hydraulic steering rams.
Type 1 Pump 24V
Reversing hydraulic pump for use with steering systems equipped with 4.9-14 cubic inch (80cc - 230cc) hydraulic steering rams.
Type 2 Pump 12V
Reversing hydraulic pump for use with steering systems equipped with 9.8-21 cubic inch (160-350cc) hydraulic steering rams.
Type 2 Pump 24V
Reversing hydraulic pump for use with steering systems equipped with 9.8-21 cubic inch (160-350cc) hydraulic steering rams.
Type 3 Pump 12V
Reversing hydraulic pump for use with steering systems equipped with 21-30.5 cubic inch (350-500 cc) hydraulic steering rams.
Type 3 Pump 24V
Reversing hydraulic pump for use with steering systems equipped with 21-30.5 cubic inch (350-500 cc) hydraulic steering rams.
Item: Raymarine Hydraulic Pumps - Errol Cain
Send us your Enquiry
about Raymarine Hydraulic Pumps
Australian Marine WholesaleThe Boat Works, Unit 2 Building J. 1 Boat Works Drive,
Coomera,
QLD.
Phone:07 5580 1511.
www.amwholesale.com.au.
[map] Fax: 07 5561 7955
